Sash Window and Patio Door Seals

Description

Replacement and retrofit sash window seals and patio door seals for smooth running.
To weatherproof, draughtproof, conserve energy and reduce intrusive noise.


uszczelka_01

Sash Window Parting Bead Seals

Sash Window Seals
Sash Window Parting Bead Seals
A durable seal designed for verticals of timber box sash windows. With a single hinge and two independently acting flippers.

Smooth moving friction free flippers unaffected by paint or stains

It can be used as a direct fit in an 8mm groove or in conjunction with our 10×10 carrier (below).

Standard Colours: Brown (ADPB02BX) & White (ADPB01WX)

A Groove size: 8mm
B Groove size: 8mm (min)
C Height: 17mm
D Suits gaps: 10mm – 16mm


uszczelka_02

Parting Bead Brush Seal

It can be used as a direct fit in an 8mm groove or in conjunction with our 10×10 carrier (below)

Available with / without brush insert

Standard Colours: Brown (ADPBBB) & White (ADPBBW)

Sold in 3m lengths

A Groove size: 8mm
B Groove size: 8mm (min)
C Height: 16mm
D Width: 8mm

Suits gaps 10 – 13mm


uszczelka_03

Parting Bead Carrier 10x10mm

If groove size is a problem try this 10x10mm Parting Bead Channel / Carrier for use with 8mm direct fit parting beads.

Will take 8mm Direct Fit or Double Flipper Parting Bead

The channel screws into the original parting bead groove to provide a locator for the parting bead seal..

Standard Colours: Brown (ADPB02BXC) & White (ADPB01WXC)

Sold in 3m lengths

A Groove size: 10mm
B Groove size: 10mm


uszczelka_04

IMPLY for sliding windows

A spring seal for either surface mounting or inset.

This product is often used as a mid-rail seal and for the top and bottom rail of sliding windows.

Standard Colours: Brown (ADIM02B) and White (ADIM02W)

Sold in 2.2m lengths

A Kerf size: 2.5 – 3mm
B Kerf size: 6mm (minimum)
C Height: 2 – 6.5mm
D Flipper length: 6.5mm
E Base length: 9.5mm


uszczelka_05

Patio door seals – centre leg carripile

Centre leg carrier for mechanical fitting into grooved frames.

Supplied with a standard pile length of 6mm to suit gaps 2 – 3.5mm

Longer length brushes available on application.

Standard Colours:
White carrier / White brush (ADCP2W)
or Brown carrier / Brown brush (ADCP2B)
Sold in 2.2m lengths

A Kerf size: 2.7mm
B Kerf size: 6mm (minimum)
C Groove size: 3mm
D Groove size: 8mm